What F6E0 means
F6E0 means the keypad has lost communication with the user interface control, the board that reads it. Until a breaker reset restores the link the keys cannot be trusted; if the code returns, the keypad, its control or the cable between them needs a technician. The heating side is not named, so zones that still respond are not the worry; the keys are.
Error codes
Reference| Code | Meaning |
|---|---|
| F6E0 | There has been a loss of communication between the user interface, or keypad, and the user interface control. |
What you observe
- Keys do nothing — Their presses never reach the interface control, so the display may not even react.
- The display shows the code at power-up — The link fails its start-up check before any key is pressed.
- Some keys work and others do not — Often a cable or connector fault rather than a failed keypad.
- NEAR MISS: keys respond but zones do not heat — That is the power side of the cooktop, a different reading.
What usually sets this code
- Keypad cable or connector — The most common cause: the short cable between keypad and interface control loosens or corrodes with heat cycles and cleaning.
- Keypad failed — Second: a failed keypad, which no longer reports presses.
- User interface control failed — Third: the board that reads the keypad stops listening, so presses go nowhere.
- Moisture — Last: moisture at the keypad, usually from cleaning or a spill.
Check in this order
- Breaker reset — First and cheapest; a link that returns after it was a passing error.
- Dry the panel — If anything was spilled or wiped, dry it and wait before trying again.
- Key test — Which keys fail tells the technician where to start.
- Technician tests the link — Under the glass, with the power off, from keypad to control board.
Clearing the code, then checking
- Breaker reset — Switch the breaker off for a minute, then on.
About 2 min
- Dry and wait — Dry the control area and leave the cooktop off for an hour if liquid got near the keypad.
Tools: microfiber clothAbout 60 min
- Key test — Press each key and note which ones respond.
Tools: notepad or phoneAbout 3 min
- STOP here if the next check needs a panel off — Anything behind a panel is a power-off technician job, and the tests that follow it are made on live circuits.
Safety for this cooktop
Safety
Unplug the appliance or switch off its breaker before removing any panel. A capacitor can hold a charge after the power is off. On a cooktop that usually means the breaker, because the unit is wired into a junction box under the counter. Do not use a cooktop with cracked glass.
When to call a technician
Call when the code returns after a reset, and say which keys respond. The keypad, the user interface control and the cable between them sit under the glass and are tested with the cooktop lifted and the power off.
Other Amana cooktop codes close to this one
Which models this reading covers
Generalized information for Amana electric and induction cooktops with touch controls. It is not a reading for Amana gas cooktops, Amana ranges, whose surface codes are listed with the oven codes, or sister brands on the same platform, whose lists can read differently. The details that change inside the line, such as wiring colours, part numbers and connector locations, belong on model pages, and none is published for F6E0 yet.
All Amana cooktop codes
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
