Verified
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
Mark S.
Dryer Repair
Dryer motor runs but drum won't spin? We fix belts, rollers, and motors. Same-day service, 90-day warranty. Average repair cost: $100–$300. Professional service recommended.
LG dryer was taking three cycles to dry a single load in Walnut Creek. Turned out the vent was 80% blocked with lint — technician cleared the full run and replaced the moisture sensor. Dries in one cycle now.
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
“Dryer was taking 3 cycles to dry a single load. Turned out the vent was clogged and the heating element was partially burned out. Both fixed in one visit.”
Dryer won't tumble repair typically costs $100 to $300. This repair requires professional tools and expertise. Most repairs are completed in 1-2 hours with a free diagnostic visit.
Broken drive belt
Failed drum rollers
Worn drum bearing
Seized idler pulley
Motor failure
The flat rubber belt wrapping the drum cracks and snaps from dry rot. Sacramento garages with daily temperature swings (cool morning to 110+ afternoon) cycle the rubber through expansion and contraction, creating micro-cracks that propagate until the belt snaps. Motor hums but drum is still.
Cost: $100–$180 | Time: 40-55 minutes
The idler pulley bearing seizes from lint infiltration and heat. In Sacramento conditions, bearing grease thins from high ambient temperature and migrates out of the bearing, leaving it dry. The pulley locks up, and the belt either snaps or slips off the pulley entirely.
Cost: $100–$200 | Time: 40-50 minutes
Drum rollers that are severely worn can seize, creating too much resistance for the motor to overcome. The motor tries to turn but stalls and trips its thermal overload. Sacramento heat softens roller rubber during the day, and weight deformation hardens when cool — eventually the flat spot seizes.
Cost: $130–$260 | Time: 45-70 minutes
Drive motors fail from overheating when combined with Sacramento ambient heat and vent restrictions. The motor either will not run at all (winding open) or hums but cannot overcome starting torque (failed start capacitor or seized bearing). Burnt smell confirms motor failure.
Cost: $180–$300 | Time: 60-90 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $100–$300 |
| Repair time | 1-2 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
This repair involves electrical components or sealed systems requiring professional tools and certification.
Free diagnostic visit for won't tumble issues. Same-day appointments available in Sacramento.
Book Free DiagnosticReviewed by Marcus Rivera, Senior Refrigeration & HVAC Technician
Samsung dryer kept shutting off after ten minutes in San Mateo. Technician found the thermal fuse had blown due to a clogged exhaust vent. Replaced the fuse and cleared the vent — works perfectly now.
Whirlpool gas dryer was producing no heat at all in our Hayward apartment. Tech found the gas valve solenoid had failed and replaced it on the first visit. Clothes come out warm and dry in one cycle.
Verified reviews from homeowners across Sacramento Metro
“Washer error code OE kept appearing. Drain pump was failing. Replaced and the washer drains properly now. Quick turnaround.”
Amanda J.
Washing Machine Repair
Sacramento, CA
“Washer error code OE kept appearing. Drain pump was failing. Replaced and the washer drains properly now. Quick turnaround.”
Amanda J.
Washing Machine Repair
Sacramento, CA
“French door fridge was leaking water inside. Drain line was clogged with ice. Tech cleared it and showed me how to prevent it. Great service.”
Daniel G.
Refrigerator Repair
Roseville, CA
“French door fridge was leaking water inside. Drain line was clogged with ice. Tech cleared it and showed me how to prevent it. Great service.”
Daniel G.
Refrigerator Repair
Roseville, CA
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
Jennifer A.
Dryer Repair
Sacramento, CA
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
Jennifer A.
Dryer Repair
Sacramento, CA
“Oven wouldn't heat past 250. Igniter was weak — replaced it and calibrated the thermostat. Baked a cake that evening to test. Perfect.”
Sarah M.
Oven Repair
Sacramento, CA
“Oven wouldn't heat past 250. Igniter was weak — replaced it and calibrated the thermostat. Baked a cake that evening to test. Perfect.”
Sarah M.
Oven Repair
Sacramento, CA
“Dishwasher wouldn't drain. Technician cleaned out the sump filter and replaced the drain valve. Runs quietly again.”
Patricia L.
Dishwasher Repair
Roseville, CA
“Dishwasher wouldn't drain. Technician cleaned out the sump filter and replaced the drain valve. Runs quietly again.”
Patricia L.
Dishwasher Repair
Roseville, CA
“Washer was leaking from the bottom during spin cycle. Tech found a cracked drain pump housing. Replaced same day — no more puddles.”
James T.
Washing Machine Repair
Elk Grove, CA
“Washer was leaking from the bottom during spin cycle. Tech found a cracked drain pump housing. Replaced same day — no more puddles.”
James T.
Washing Machine Repair
Elk Grove, CA