Verified
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
Mark S.
Dryer Repair
Dryer squeaking, thumping, or grinding? We replace rollers, belts, and bearings. Same-day service, 90-day warranty. Average repair cost: $100–$350. Professional service recommended.
LG dryer was taking three cycles to dry a single load in Walnut Creek. Turned out the vent was 80% blocked with lint — technician cleared the full run and replaced the moisture sensor. Dries in one cycle now.
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
“Gas dryer wouldn't ignite. Flame sensor and gas valve solenoids replaced. Runs hot again. Tech explained everything clearly.”
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
“Dryer was taking 3 cycles to dry a single load. Turned out the vent was clogged and the heating element was partially burned out. Both fixed in one visit.”
Dryer making noise repair typically costs $100 to $350. This repair requires professional tools and expertise. Most repairs are completed in 1-2 hours with a free diagnostic visit.
Worn drum rollers
Damaged drum belt
Failed drum bearing
Worn glides or felt seal
Loose blower wheel
Drum rollers flatten on one side from heat and weight. Sacramento garage heat (100-115 degrees) softens roller rubber during the day, and the drum weight creates flat spots that harden overnight. The thumping is rhythmic — one thump per drum rotation — and worsens with heavier loads.
Cost: $120–$240 | Time: 45-60 minutes
Dryer belts dry out and crack faster in Sacramento heat. A cracked belt squeals as the damaged section passes over pulleys. Belts may also develop glazed spots from idler friction in high temperatures. The squeal is constant and pitch-shifts slightly with drum load.
Cost: $100–$180 | Time: 40-55 minutes
Front drum glides are plastic or felt strips that the drum rides on. Sacramento heat causes plastic glides to warp and felt to dry out, creating metallic scraping as the drum contacts the bulkhead directly. Rear bearings fail when lubrication dries in high ambient temperatures.
Cost: $130–$280 | Time: 50-80 minutes
The blower wheel pushes air through the drum and out the vent. Lint accumulation creates imbalance, and the plastic hub can crack from heat stress in Sacramento garages. Noise is a high-pitched whine or rattle that changes with blower speed, distinct from drum-speed thumping.
Cost: $100–$200 | Time: 40-60 minutes
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $100–$350 |
| Repair time | 1-2 hours |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
This repair involves electrical components or sealed systems requiring professional tools and certification.
Free diagnostic visit for making noise issues. Same-day appointments available in Sacramento.
Book Free DiagnosticReviewed by Marcus Rivera, Senior Refrigeration & HVAC Technician
Samsung dryer kept shutting off after ten minutes in San Mateo. Technician found the thermal fuse had blown due to a clogged exhaust vent. Replaced the fuse and cleared the vent — works perfectly now.
Whirlpool gas dryer was producing no heat at all in our Hayward apartment. Tech found the gas valve solenoid had failed and replaced it on the first visit. Clothes come out warm and dry in one cycle.
Verified reviews from homeowners across Sacramento Metro
“Washer error code OE kept appearing. Drain pump was failing. Replaced and the washer drains properly now. Quick turnaround.”
Amanda J.
Washing Machine Repair
Sacramento, CA
“Washer error code OE kept appearing. Drain pump was failing. Replaced and the washer drains properly now. Quick turnaround.”
Amanda J.
Washing Machine Repair
Sacramento, CA
“French door fridge was leaking water inside. Drain line was clogged with ice. Tech cleared it and showed me how to prevent it. Great service.”
Daniel G.
Refrigerator Repair
Roseville, CA
“French door fridge was leaking water inside. Drain line was clogged with ice. Tech cleared it and showed me how to prevent it. Great service.”
Daniel G.
Refrigerator Repair
Roseville, CA
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
Jennifer A.
Dryer Repair
Sacramento, CA
“Dryer made a loud squealing noise. Drum rollers and belt were worn. Tech had both parts and finished in 45 minutes.”
Jennifer A.
Dryer Repair
Sacramento, CA
“Oven wouldn't heat past 250. Igniter was weak — replaced it and calibrated the thermostat. Baked a cake that evening to test. Perfect.”
Sarah M.
Oven Repair
Sacramento, CA
“Oven wouldn't heat past 250. Igniter was weak — replaced it and calibrated the thermostat. Baked a cake that evening to test. Perfect.”
Sarah M.
Oven Repair
Sacramento, CA
“Dishwasher wouldn't drain. Technician cleaned out the sump filter and replaced the drain valve. Runs quietly again.”
Patricia L.
Dishwasher Repair
Roseville, CA
“Dishwasher wouldn't drain. Technician cleaned out the sump filter and replaced the drain valve. Runs quietly again.”
Patricia L.
Dishwasher Repair
Roseville, CA
“Washer was leaking from the bottom during spin cycle. Tech found a cracked drain pump housing. Replaced same day — no more puddles.”
James T.
Washing Machine Repair
Elk Grove, CA
“Washer was leaking from the bottom during spin cycle. Tech found a cracked drain pump housing. Replaced same day — no more puddles.”
James T.
Washing Machine Repair
Elk Grove, CA