Want a regional phone & address? Pick your area.
Kenmore·Refrigeratorlow severity
Kenmore Refrigerator Error Code Er HS
Humidity sensor fault
Common Causes
- 1Humidity sensor failure
- 2Sensor wiring damage
- 3Connector corrosion
Step-by-Step Troubleshooting
- 1
Locate humidity sensor — typically in the fresh food compartment air duct
- 2
Check sensor connector for corrosion from condensation
- 3
Test sensor wiring continuity from sensor to main board
- 4
Replace humidity sensor if wiring tests good
Pro Diagnostic Tip
Applies to models starting with 795.xxxxx (LG platform). Er HS is a low-priority fault — the refrigerator will continue to cool normally but may not manage humidity optimally. Repair at convenience.
You Might Also Notice
- •Excess condensation inside refrigerator
- •Vegetables wilting faster than normal
- •Frost forming on fresh food items
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$175
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
EBG61285804 humidity sensor (LG platform)
Do You Have the Right Tools?
Refrigerant gauges ($200+), vacuum pump ($250), leak detector ($150), and EPA-certified recovery equipment. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Refrigerant (R-134a/R-600a) requires EPA certification to handle. Improper discharge is a federal violation and health hazard. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code Er HS disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Kenmore error code Er HS mean?
Kenmore error code Er HS indicates: Humidity sensor fault. This is a low-severity issue affecting your refrigerator.
How do I fix Kenmore error code Er HS?
Locate humidity sensor — typically in the fresh food compartment air duct Then, Check sensor connector for corrosion from condensation Then, Test sensor wiring continuity from sensor to main board There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my refrigerator has error Er HS?
Besides the error code on the display, common signs include: Excess condensation inside refrigerator; Vegetables wilting faster than normal; Frost forming on fresh food items. If you notice any of these symptoms, check your refrigerator's display panel for error code Er HS.
How much does it cost to fix Kenmore Er HS?
Repair costs for Kenmore Er HS typically range from $75 to $175 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.