Want a regional phone & address? Pick your area.
Amana·Washermedium severity
Amana Washer Error Code Lo FL
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water.
Common Causes
- 1Are they connected correctly?
- 2Are the water inlet screens clogged?
- 3Was an anti-flood device installed?
- 4For more information, refer to "Should Flood-Safe Devices be Used on a Washer?
- 5) If the drain is below 39" (99 cm), the water will start to flow out of the machine due to gravity.
Step-by-Step Troubleshooting
- 1
Press the power button, and the washer will start a drain routine, which takes approximately 8 to 10 minutes, during which the pump will run continuously.
- 2
Please wait 10 minutes before trying to perform any functions.
- 3
Ensure the Hot and Cold water valves are fully open; both hot and cold inlet hoses must be connected for the washer to operate correctly.
- 4
Ensure the hoses are not kinked, which can restrict water flow.
- 5
Ensure the hot (red) hose is connected to the hot (red) water valve and the cold (blue) hose is connected to the cold (blue) water valve.
- 6
Remove the water hoses and inspect for buildup.
- 7
Drain hose extending more than 4.
- 8
Check that the top of the drain is at least 39" (99 cm) high (as measured from the floor.
Parts, Cost & Difficulty
Parts That May Need Replacement
water valveinlet hosewater inlet screendrain hose
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Diagnose the root cause, test affected components with calibrated meters, replace faulty parts with OEM replacements, and verify proper operation through a full test cycle.
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code Lo FL disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Amana error code Lo FL mean?
Amana error code Lo FL indicates: The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water.. This is a medium-severity issue affecting your washer.
How do I fix Amana error code Lo FL?
Press the power button, and the washer will start a drain routine, which takes approximately 8 to 10 minutes, during which the pump will run continuously. Then, Please wait 10 minutes before trying to perform any functions. Then, Ensure the Hot and Cold water valves are fully open; both hot and cold inlet hoses must be connected for the washer to operate correctly. There are 5 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How much does it cost to fix Amana Lo FL?
Repair costs for Amana Lo FL typically range from $100 to $500 depending on the specific cause. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online