Want a regional phone & address? Pick your area.
Amana·Washermedium severity
Amana Washer Error Code F9 E1
Long drain
Common Causes
- 1Drain pump filter clogged
- 2Drain hose kinked
- 3Pump impeller jammed
Step-by-Step Troubleshooting
- 1
Locate the drain pump filter at the lower front of the washer (behind the access panel)
- 2
Place towels and a pan underneath, then open the filter to drain trapped water
- 3
Remove and clean the filter of coins, hair pins, and debris
- 4
Inspect the drain hose for kinks, especially at the standpipe connection
- 5
If the pump hums but water does not flow, the impeller is broken — replace the pump
Pro Diagnostic Tip
On Amana front-loaders, clean the drain pump filter quarterly. Coins and small items are the most common obstructions. If the pump hums loudly without water flow, the impeller blades are broken — the pump must be replaced. The same pump part fits Amana, Whirlpool, and Maytag.
You Might Also Notice
- •Water remains in drum after cycle
- •Drain pump runs for extended periods
- •Clothes come out soaking wet
- •Foul odor from standing water
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$100–$225
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10730972 Drain Pump MotorW10906534 Drain Hose Extension Kit
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Clean drain pump filter
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F9 E1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Amana error code F9 E1 mean?
Amana error code F9 E1 indicates: Long drain. This is a medium-severity issue affecting your washer.
How do I fix Amana error code F9 E1?
Locate the drain pump filter at the lower front of the washer (behind the access panel) Then, Place towels and a pan underneath, then open the filter to drain trapped water Then, Remove and clean the filter of coins, hair pins, and debris There are 2 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error F9 E1?
Besides the error code on the display, common signs include: Water remains in drum after cycle; Drain pump runs for extended periods; Clothes come out soaking wet. If you notice any of these symptoms, check your washer's display panel for error code F9 E1.
How much does it cost to fix Amana F9 E1?
Repair costs for Amana F9 E1 typically range from $100 to $225 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.