Want a regional phone & address? Pick your area.
Amana·Washerlow severity
Amana Washer Error Code F2 E1
Stuck key on the control panel
Common Causes
- 1A button physically stuck or held by residue
- 2Detergent or spill film bridging the membrane
- 3Swollen or warped keypad overlay
- 4Failed interface membrane
Step-by-Step Troubleshooting
- 1
Press and release each button on the Amana console in turn to free any key that is mechanically hung up
- 2
Wipe the panel with a barely damp cloth to clear detergent film or a sticky spill that can bridge a button contact
- 3
Check the overlay for a swollen or lifted spot that keeps constant pressure on one key
- 4
If no button is stuck and the code stays, the membrane behind the panel has failed and the interface needs replacement
Pro Diagnostic Tip
The control reads a key held longer than about fifteen seconds as stuck and refuses to start, so the fix is often just cleaning the panel. On Amana value consoles a fabric-softener splash that dries under the overlay is a frequent silent cause, so clean around every button before ordering an interface.
You Might Also Notice
- •The washer will not start or respond to Start
- •One button feels mushy or stays depressed
- •The panel behaves erratically
- •A key seems to repeat on its own
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$0–$210
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
User-interface / keypad membrane
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Wipe the panel and make sure no button is held down
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F2 E1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Amana error code F2 E1 mean?
Amana error code F2 E1 indicates: Stuck key on the control panel. This is a low-severity issue affecting your washer.
How do I fix Amana error code F2 E1?
Press and release each button on the Amana console in turn to free any key that is mechanically hung up Then, Wipe the panel with a barely damp cloth to clear detergent film or a sticky spill that can bridge a button contact Then, Check the overlay for a swollen or lifted spot that keeps constant pressure on one key There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error F2 E1?
Besides the error code on the display, common signs include: The washer will not start or respond to Start; One button feels mushy or stays depressed; The panel behaves erratically. If you notice any of these symptoms, check your washer's display panel for error code F2 E1.
How much does it cost to fix Amana F2 E1?
Repair costs for Amana F2 E1 typically range from $0 to $210 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Call NowAvailable 24/7 — call or textBook Online