LG washers: what CPSC incident reports show

What this page is counting#

Every number on this page is a share of CPSC SaferProducts incident reports for LG washers, 2011-2026, n=295.

The CPSC SaferProducts database records reports of harm, not a census of units in service. It is a safety reporting channel: people report what is dangerous, so fire, smoke and burn hazards dominate it. Nothing here is a failure rate, and nothing here says how often LG washers break — only what was reported, and in what proportion of those reports each part is named. A narrative mention of a part is not that part failing. Method: /methodology.

What CPSC reports say about LG washers#

The 295 CPSC SaferProducts incident reports filed for LG washers between 2011 and 2026 spread thinly across many components rather than concentrating in one. The control board leads at 5%, or 14 reports, followed by the motor at 4% and wiring or power cord at 3%. Below those sit the igniter and the lint trap or vent at 3% each, the water valve or line at 2%, and the drain pump or hose at 1%. Two of those categories describe dryer hardware, which is a property of how the corpus is built: the measure counts parts named anywhere in a narrative, and a filing about a stacked pair or a washer-dryer combination names the dryer part inside a report indexed to the washer. The flatness matters more than the ordering — no single component stands out as the subject of these filings.

Which parts the reports name#

Share of CPSC SaferProducts incident reports for LG washers, 2011-2026, n=295 whose narrative mentions each part. A report naming a part several times counts once.

Method: /methodology.

Recalls on record#

Recall notices CPSC has issued for this brand and appliance, listed as published. This is a list of documents, not a rate: it says nothing about how many units were affected as a share of any population.

• LG Washers: CPSC recall 13073 (2012-12-18) — LG Recalls Top-Loading Washing Machines Due to Risk of Injury; source: https://www.cpsc.gov/Recalls/2013/LG-Recalls-Top-Loading-Washing-Machines-Due-to-Risk-of-Injury

What the certified listings say#

121 LG washers are catalogued in the certified-product listings. A certified-product census is not a census of units in service, and these specs are unrelated to the incident reports above.

Method: /methodology.

What an owner can act on#

Water is the risk an owner can actually inspect. Shut the taps and look at both fill hoses where they meet the valve: a bulge, rust at the crimped collar, or damp that returns after wiping means the hose is finished. Follow the drain hose to its standpipe and confirm it is secured rather than resting in place, because a hose that walks out during a spin empties the machine onto the floor.

Electrical symptoms end an inspection rather than extend it. A washer that trips a breaker, resets itself mid-cycle, or lights a console pattern matching no programme should be isolated at the breaker instead of power-cycled repeatedly. Check the cord where it enters the cabinet and the outlet face for discoloration or heat marks.

Motion tells you about the motor and bearings. A drum that grinds through spin, a machine that walks on a balanced load, or a tub with visible play all point at hardware under load. Level the feet and re-run a balanced load first — an unlevel machine imitates a failing one convincingly.

If the washer is stacked with or beside a dryer, treat the dryer's lint path as part of the same inspection; that is what the igniter and lint-trap rows describe. One CPSC recall notice is listed above, issued in 2012 and reprinted as published. Coverage is by production range, so check the model number against the manufacturer's lookup and the CPSC database.

Frequently asked questions#

Are LG washers safe?#

This page cannot say. The CPSC corpus records reports of harm without recording the machines that run normally, so 295 reports cannot be turned into a rate of anything. What the data supports is a description of which parts these narratives named.

Have LG washers been recalled?#

Yes — one CPSC recall notice for this brand and appliance is listed above, published in 2012 and reproduced as issued. Whether it reaches your machine depends on the production range, so check the model number from the plate inside the door opening against the manufacturer's lookup and the CPSC recall database.

What parts are named most often in LG washers incident reports?#

The control board at 5% of the 295 reports, or 14 of them, then the motor at 4% and wiring or power cord at 3%. The igniter and the lint trap or vent each appear in 3%, the water valve or line in 2%, and the drain pump or hose in 1%. The spread is unusually flat, so the top row carries little more weight than those beneath it.

Why do dryer parts appear in a washer report?#

Because the figure counts any part named in a narrative, and reports are indexed to one appliance. Someone describing a stacked laundry pair or a washer-dryer combination names the dryer's igniter or lint trap inside a filing recorded against the washer. The rows are reproduced as measured rather than removed, since editing them would misrepresent what the corpus contains.

What should I check on my LG washer?#

Fill hoses first: bulges, rust at the collar, damp that returns after wiping. Confirm the drain hose is secured at the standpipe. Watch for a drum that grinds through spin or a machine that walks on a balanced load. Anything electrical means isolating the machine at the breaker instead.

Does a CPSC report mean the appliance failed?#

No. The database publishes accounts as filed, without determining what went wrong, and a narrative may name a component that was never at fault. That is why the table is described as reports mentioning a part rather than as parts failing.