Samsung Dryer Parts Guides — Complete Parts Guide

Eleven parts guides, and three of them are labelled as straightforward do-it-yourself jobs: the lint filter, the sensor and the switch. That is a useful signal, because it separates the parts you can reasonably tackle from the ones that need more. The drum felt seal is here too, the strip that seals the drum against the bulkhead. Around them sit the heating element, the igniter, the thermostat, the blower fan, the drive motor, the door latch and the control board.

Take the hub at its word and start with the three easy ones. A load that stops damp on an automatic cycle is the moisture sensor, which usually needs cleaning rather than replacing. A machine that does nothing is the switch. A long cycle is the filter and the vent. Only then move to the harder half: the felt seal, which shows itself as clothes coming out marked or snagged, and the heat path, where the igniter or the element applies depending on the fuel.

The heat path is the boundary in both cases. On gas that means the burner and its supply, where a leak is the risk rather than a bad repair; on electric it means the element circuit and its 240 volt terminal block. The vent belongs to both, since restricted exhaust is a fire hazard and the reason thermostats open. EasyBear repairs Samsung dryers in Sacramento and across the Bay Area.