Dryer Control Board Replacement Cost

How much does a dryer control board replacement cost?#

Budget $180 to $450 to swap the control board in a dryer, though most jobs settle near $315. Where your quote falls comes down to a few levers: an aftermarket part keeps the main board affordable, while an original component, tight access, or a premium Bosch name pushes it higher. Much of the price is the reach — some designs surrender the board in minutes, others demand the unit come most of the way apart first. The work is routine for a pro: isolate the fault, fit the control board, and confirm the unit runs clean before packing up, which is why a firm quote is easy to give up front. The breakdown just below separates the part price from the labor so you can see which side of the $180 to $450 spread a given estimate sits on. Set against the $450 to $1,300 a new dryer costs to buy and install, restoring the control board is the economical move on any machine with good years left in it.

Dryer control board replacement cost

• What it does: the control board runs the electronics and cycle logic.
• Signs it is failing: a dead panel, unresponsive buttons, or cycles that quit partway.
• The repair job: diagnosing the board, fitting an OEM replacement, and confirming every cycle.
• DIY or pro: usually a technician job — a wrong board or a missed reprogram wastes the part.

Against a new dryer at $450–$1,300 installed, a control board repair at $180–$450 is usually the cheaper fix — unless the dryer is already old or has other faults.

Pro note: a technician rules out a failed door switch or a loose harness before condemning the board, since those mimic a dead board for far less money.

Is replacing the control board on a dryer worth it?#

On a reasonably young unit, $180 to $450 to restore the main board beats the $450 to $1,300 of buying new without much debate; the fix buys years more use from a machine that is otherwise sound. Age shifts the math. When the board is the third thing to fail this year, or the unit is well past 10 years, a top-of-range $450 bill is better put toward a replacement than a patch. In short, the repair pays on a healthy unit, and a licensed tech can confirm the control board is the real culprit before you spend a dollar on parts. Either way, a licensed EasyBear pro pins the fault and quotes the control board before any part is ordered, so you never pay to guess.

Dryer Control board replacement cost: FAQ#

How much does a dryer control board replacement cost?#

A dryer control board replacement generally runs $180–$450, and about $315 on a routine job. Part grade, brand, and how hard the main board is to reach are what set where you land.

Is replacing the control board worth it, or should I just buy new?#

Usually worth it on a machine that is not too old — $180 to $450 is minor next to the $450 to $1,300 of buying new. Replacement only wins once the unit is aging and other repairs are stacking up behind this one.

What makes the board fail?#

Common causes are power surges, moisture reaching the electronics, and simple age-related component failure. The warning signs to watch for are a dead panel, unresponsive buttons, or cycles that quit partway.

Can I replace the control board myself?#

Most owners leave this one to a pro: reaching the control board and confirming the diagnosis takes the right tools, and a wrong part is money down the drain. A technician also carries the exact component and stands behind the work.

How long does the job take?#

Plan on roughly an hour for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.