What 5d means
A display that reads 5d is usually showing Sd or Sud, the excess suds message: there are too many suds in the washer, and it is running a suds reduction routine. Allow the washer to continue. The routine adds time to the cycle but clears the suds, and the fix for next time is usually less detergent, or the right kind. Opening the door or stopping the cycle only interrupts the routine and leaves the suds behind.
Error codes
Reference| Code | Meaning |
|---|---|
| 5d | If Sd or Sud (excess suds) appears in the display, you have excessive suds in the washer. The washer is running a suds reduction routine. Allow the washer to continue. |
What the washer does alongside 5d
- 5d, Sd or Sud on the display — The washer has detected excess suds.
- A cycle running longer than usual — The suds reduction routine adds time.
- Foam visible through the door — Too much lather for the water in the drum.
- Extra rinsing or draining sounds — The washer working to clear the suds.
What triggers 5d, most likely first
- Too much detergent — First: the commonest cause, especially with small loads.
- Detergent not made for high-efficiency washers — Second: regular detergent foams far more than these washers expect.
- Soap residue carried in by the load — Third: items pre-treated or washed with extra soap bringing it into the drum.
- Soft water — Last: soft water lets detergent lather more, so less is needed.
Check order for 5d, and why
- Let the routine finish — The washer is designed to clear the suds itself.
- Check the detergent type — Look for the high-efficiency mark on the label.
- Check the amount used — Follow the detergent's guidance for load size and water hardness.
- Run a rinse if suds remain — A rinse and spin clears what is left.
What to do while the suds clear
- Allow the washer to continue — Do not stop or open the washer; let the suds reduction routine finish.
- Rinse out residue if needed — If suds remain at the end, run a rinse and spin with no detergent.
- Use the right detergent — Choose a detergent marked for high-efficiency washers.
- Use less next time — Measure carefully, and use less for small loads or soft water.
Tools: measuring cupAbout 1 min
Safety while the suds clear
Safety
Do not open or force the door while the washer is clearing suds; water and foam may spill, and the door lock protects you during the cycle. Unplug the washer before any service, and wipe up any foam that escapes so nobody slips on a wet floor. If foam escapes from the dispenser drawer, wipe it up promptly, and keep the area around the washer dry.
When 5d needs a technician
Excess suds need no technician in most cases. Call if the suds message keeps appearing with the right detergent in the right amount, if the washer cannot finish the routine, or if water leaks from the washer. If the message appears on every wash despite a measured dose of the right detergent, mention it when you book, since residue built up inside the washer can also need clearing.
Other Amana washer codes
Which models this reading covers
This reading applies to Amana washers that show Sd or Sud for excess suds, as the table states. Display styles and suds routines vary by model, and a model-specific page, where one exists, is the better guide. None is listed yet; start at the Amana washer code index below. Whether your display shows Sd, Sud or something that looks like 5d depends on the model.
Amana washer code index
Lead Appliance Repair Technician · 12 years experience
Experienced technician with 12 years specializing in washing machine and dryer repairs across all major brands.
