Want a regional phone & address? Pick your area.
Maytag·Dishwashermedium severity
Maytag Dishwasher Error Code F5 E1
Door switch fault
Common Causes
- 1Door switch failure
- 2Door latch worn
- 3Wiring to switch damaged
Step-by-Step Troubleshooting
- 1
Open and firmly close the door, ensuring the latch clicks securely
- 2
Inspect the door latch for visible wear, cracks, or misalignment
- 3
Use a multimeter to test the door switch for continuity when actuated — should read 0 ohms closed
- 4
Check the wiring harness from the door switch to the main control board for pinched wires
Pro Diagnostic Tip
On Maytag dishwashers, the door switch is a safety interlock that must confirm the door is sealed before the wash pump activates. If the dishwasher starts filling but stops before washing, the switch may be intermittent — it passes the initial check but loses contact from vibration.
You Might Also Notice
- •Dishwasher does not start when cycle is selected
- •Cycle starts but stops within 30 seconds
- •Door latch feels loose or does not click firmly
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$200
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10545920 Door Switch AssemblyW10862259 Door Latch Assembly
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F5 E1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Maytag error code F5 E1 mean?
Maytag error code F5 E1 indicates: Door switch fault. This is a medium-severity issue affecting your dishwasher.
How do I fix Maytag error code F5 E1?
Open and firmly close the door, ensuring the latch clicks securely Then, Inspect the door latch for visible wear, cracks, or misalignment Then, Use a multimeter to test the door switch for continuity when actuated — should read 0 ohms closed There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my dishwasher has error F5 E1?
Besides the error code on the display, common signs include: Dishwasher does not start when cycle is selected; Cycle starts but stops within 30 seconds; Door latch feels loose or does not click firmly. If you notice any of these symptoms, check your dishwasher's display panel for error code F5 E1.
How much does it cost to fix Maytag F5 E1?
Repair costs for Maytag F5 E1 typically range from $75 to $200 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.