Want a regional phone & address? Pick your area.
JennAir·Oven / Rangehigh severity
JennAir Oven / Range Error Code F3E2
Oven temperature sensor shorted
Common Causes
- 1RTD probe internally shorted
- 2Harness insulation melted to metal
- 3Moisture bridging the connector
Step-by-Step Troubleshooting
- 1
Unplug the JennAir range and read the RTD probe at the control connector — a short reads near zero ohms instead of about one thousand eighty
- 2
Move the meter to the probe plug at the cavity; a correct reading there isolates the short to the harness run
- 3
Follow the sensor lead for melted insulation or bare copper touching the cavity sheet metal
- 4
Inspect the connector for cooking moisture or debris forming a conductive path between the pins
Pro Diagnostic Tip
A shorted probe makes the JennAir control read false-high and cut heat early, so meals come out undercooked while the display shows a temperature far above the true cavity reading — on a double oven, an F3E2 with no cavity tag defaults to the lower oven sensor.
You Might Also Notice
- •Oven underheats or cycles erratically
- •Display reads far above actual temperature
- •Oven turns on and off rapidly
- •Food undercooked despite correct settings
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$195
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Oven temperature sensor (RTD probe)
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Diagnose the root cause, test affected components with calibrated meters, replace faulty parts with OEM replacements, and verify proper operation through a full test cycle.
This repair requires combustion analyzers, gas pressure manometers, and temperature calibration instruments. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code F3E2 is a high-severity issue that can cause further damage to your oven / range if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does JennAir error code F3E2 mean?
JennAir error code F3E2 indicates: Oven temperature sensor shorted. This is a high-severity issue affecting your oven / range.
How do I fix JennAir error code F3E2?
Unplug the JennAir range and read the RTD probe at the control connector — a short reads near zero ohms instead of about one thousand eighty Then, Move the meter to the probe plug at the cavity; a correct reading there isolates the short to the harness run Then, Follow the sensor lead for melted insulation or bare copper touching the cavity sheet metal There are 1 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my oven / range has error F3E2?
Besides the error code on the display, common signs include: Oven underheats or cycles erratically; Display reads far above actual temperature; Oven turns on and off rapidly. If you notice any of these symptoms, check your oven / range's display panel for error code F3E2.
How much does it cost to fix JennAir F3E2?
Repair costs for JennAir F3E2 typically range from $75 to $195 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related JennAir Oven / Range Error Codes
Call NowAvailable 24/7 — call or textBook Online