Want a regional phone & address? Pick your area.
JennAir·Oven / Rangemedium severity
JennAir Oven / Range Error Code F2E0
Shorted keypad (touchpad)
Common Causes
- 1Touch membrane worn through
- 2Moisture trapped behind the glass
- 3Grease infiltration into the keypad layer
Step-by-Step Troubleshooting
- 1
Drop power at the breaker for a few minutes, restore it, and see whether the fault clears or a region of the panel still reads as pressed
- 2
If only certain touch zones trigger the fault, the membrane beneath that area has shorted and the panel needs replacing
- 3
Unplug the ribbon from the touch panel to the control board — the fault stopping confirms the keypad rather than the board
- 4
Wipe cooking film thoroughly from the glass edge before fitting the replacement, since residue re-bridges a fresh membrane
Pro Diagnostic Tip
JennAir mounts the touch glass just above the oven vent, so self-clean heat is the usual trigger for F2E0 — when the fault appears only during or after a clean cycle, the overlay is delaminating and should be replaced before the control board is suspected.
You Might Also Notice
- •Panel beeps continuously with no input
- •Oven switches on by itself
- •Fault will not clear from the display
- •Specific touch zones raise the error
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$150–$350
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Touch panel / control overlayElectronic oven control board
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F2E0 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does JennAir error code F2E0 mean?
JennAir error code F2E0 indicates: Shorted keypad (touchpad). This is a medium-severity issue affecting your oven / range.
How do I fix JennAir error code F2E0?
Drop power at the breaker for a few minutes, restore it, and see whether the fault clears or a region of the panel still reads as pressed Then, If only certain touch zones trigger the fault, the membrane beneath that area has shorted and the panel needs replacing Then, Unplug the ribbon from the touch panel to the control board — the fault stopping confirms the keypad rather than the board There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my oven / range has error F2E0?
Besides the error code on the display, common signs include: Panel beeps continuously with no input; Oven switches on by itself; Fault will not clear from the display. If you notice any of these symptoms, check your oven / range's display panel for error code F2E0.
How much does it cost to fix JennAir F2E0?
Repair costs for JennAir F2E0 typically range from $150 to $350 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related JennAir Oven / Range Error Codes
Call NowAvailable 24/7 — call or textBook Online