Want a regional phone & address? Pick your area.
Hotpoint·Dryerhigh severity
Hotpoint Dryer Error Code E2
Exhaust sensor shorted low
Common Causes
- 1Sensor bead collapsed to a short
- 2Damp bridging the sensor plug
- 3A bared lead grounding to the bulkhead
Step-by-Step Troubleshooting
- 1
Pull the plug and reach the outlet bead riding on the blower scroll
- 2
Read it cold — a shorted bead sits down near zero instead of up around ten thousand ohms
- 3
Wick any moisture or green crust off the plug that could be bridging the two pins
- 4
A bead that reads right once unplugged means the harness is grounding out along its run
Pro Diagnostic Tip
A shorted outlet sensor feeds the GE-built control a false cold reading, so it drives the heat harder and the drum runs away hot. Treat it as urgent and swap the bead promptly, because sustained overheating pops the thermal fuse and can scorch a load.
You Might Also Notice
- •The drum running far too hot
- •Loads coming out scorched or overdried
- •The thermal fuse blowing again and again
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$75–$175
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WE04X25996 exhaust thermistor
Do You Have the Right Tools?
Gas leak detector ($130), thermal fuse tester ($95), belt tension gauge, and vent inspection camera ($180). Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas dryers carry carbon monoxide and explosion risk. Even electric dryers involve 240V circuits that can deliver a fatal shock. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E2 is a high-severity issue that can cause further damage to your dryer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Hotpoint error code E2 mean?
Hotpoint error code E2 indicates: Exhaust sensor shorted low. This is a high-severity issue affecting your dryer.
How do I fix Hotpoint error code E2?
Pull the plug and reach the outlet bead riding on the blower scroll Then, Read it cold — a shorted bead sits down near zero instead of up around ten thousand ohms Then, Wick any moisture or green crust off the plug that could be bridging the two pins There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my dryer has error E2?
Besides the error code on the display, common signs include: The drum running far too hot; Loads coming out scorched or overdried; The thermal fuse blowing again and again. If you notice any of these symptoms, check your dryer's display panel for error code E2.
How much does it cost to fix Hotpoint E2?
Repair costs for Hotpoint E2 typically range from $75 to $175 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related Hotpoint Dryer Error Codes
Call NowAvailable 24/7 — call or textBook Online