Want a regional phone & address? Pick your area.
Beko·Washerhigh severity
Beko Washer Error Code E04
Overflow — water level above maximum
Common Causes
- 1Inlet valve stuck open
- 2Pressure (level) sensor failed
- 3Pressure hose blocked or split
- 4Control board level relay stuck
Flood risk. Shut the supply taps immediately. If water has reached an outlet or the plug, do not touch the machine — isolate power at the breaker first.
Step-by-Step Troubleshooting
- 1
Unplug the washer and close both supply taps immediately to stop further filling
- 2
Check whether water keeps entering with the power off — if so, the inlet valve is mechanically stuck open
- 3
Locate the pressure sensor near the top of the tub and inspect its air hose for water, splits, or kinks
- 4
Blow gently through the pressure hose and listen for the sensor to click at the switch
- 5
If the valve holds and the hose is clear, replace the pressure (level) sensor
Pro Diagnostic Tip
E04 is a flood-safety code. If the drum keeps filling with the plug pulled, the inlet valve is stuck — the water supply must be shut off at the taps before any further diagnosis.
You Might Also Notice
- •Water overflowing the door seal
- •Water on the floor around the washer
- •Drum fills continuously
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$120–$260
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Pressure (water level) sensorWater inlet valvePressure sensor air hose
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E04 is a high-severity issue that can cause further damage to your washer if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Beko error code E04 mean?
Beko error code E04 indicates: Overflow — water level above maximum. This is a high-severity issue affecting your washer.
How do I fix Beko error code E04?
Unplug the washer and close both supply taps immediately to stop further filling Then, Check whether water keeps entering with the power off — if so, the inlet valve is mechanically stuck open Then, Locate the pressure sensor near the top of the tub and inspect its air hose for water, splits, or kinks There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my washer has error E04?
Besides the error code on the display, common signs include: Water overflowing the door seal; Water on the floor around the washer; Drum fills continuously. If you notice any of these symptoms, check your washer's display panel for error code E04.
How much does it cost to fix Beko E04?
Repair costs for Beko E04 typically range from $120 to $260 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related Beko Washer Error Codes
E01Door lock fault — door not confirmed lockedhighE02Water fill fault — tub did not reach level in timemediumE03Drain fault — water not pumped out in timemediumE05Temperature (NTC) sensor faultmediumE06Heating element fault — water not heatingmediumE07Motor tacho fault — drum speed signal abnormalhigh
Call NowAvailable 24/7 — call or textBook Online