Want a regional phone & address? Pick your area.
Beko·Washermedium severity
Beko Washer Error Code E02
Water fill fault — tub did not reach level in time
Common Causes
- 1Supply tap closed or partly open
- 2Clogged inlet filter screens
- 3Inlet valve failed
- 4Low household water pressure
Step-by-Step Troubleshooting
- 1
Confirm both hot and cold supply taps are fully open and the hoses are not kinked
- 2
Turn off the taps, unthread the fill hoses, and clean the mesh inlet screens at the valve
- 3
Check household pressure — a bucket should fill quickly at the laundry tap; weak flow starves the valve
- 4
Unplug the washer and test each inlet valve solenoid for continuity with a multimeter
- 5
If screens are clear, pressure is good, and a solenoid reads open, replace the water inlet valve
Pro Diagnostic Tip
Sacramento hard water silts up the fine inlet screens within a year. Clean them before ordering a valve — a blocked screen mimics a failed valve on E02 about half the time.
You Might Also Notice
- •Washer fills very slowly
- •Cycle stalls early with little water
- •No water enters the drum
Parts, Cost & Difficulty
Repair Difficulty
Easy — DIY FriendlyEstimated Repair Cost
$75–$190
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Water inlet valveInlet screen filters
Do You Have the Right Tools?
Bearing puller set ($120), drum spider wrench ($85), multimeter ($85), and diagnostic software. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Open both supply taps fully and clean the inlet screens
This repair requires bearing pullers, drum spider wrenches, and diagnostic software for control board calibration. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
High-voltage components and pressurized water lines create flood and shock risk. A single loose fitting can cause thousands in water damage. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code E02 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Beko error code E02 mean?
Beko error code E02 indicates: Water fill fault — tub did not reach level in time. This is a medium-severity issue affecting your washer.
How do I fix Beko error code E02?
Confirm both hot and cold supply taps are fully open and the hoses are not kinked Then, Turn off the taps, unthread the fill hoses, and clean the mesh inlet screens at the valve Then, Check household pressure — a bucket should fill quickly at the laundry tap; weak flow starves the valve There are 2 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How do I know if my washer has error E02?
Besides the error code on the display, common signs include: Washer fills very slowly; Cycle stalls early with little water; No water enters the drum. If you notice any of these symptoms, check your washer's display panel for error code E02.
How much does it cost to fix Beko E02?
Repair costs for Beko E02 typically range from $75 to $190 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related Beko Washer Error Codes
Call NowAvailable 24/7 — call or textBook Online