Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300
A ductless mini-split takes its circuit from the label, not from a stopwatch on the compressor.
An electric baseboard heater is landed straight onto a line-voltage thermostat, never an outlet.
A plug-in electric fireplace runs on 120 volts, drawing 12 to 13 amps for 1,400 to 1,500 watts on a 15 to 20-amp branch through a 5-15R outlet.
An electric pool heater is a heavy load wired straight in on 240 volts. The resistance style draws 50 amps for 12,000 watts behind a 60-amp breaker, while a.
An electric smoker runs on 120 volts through a 5-15R outlet on a 15-amp branch. A compact cabinet draws 7 to 10 amps for 800 to 1,200 watts, while a large.
A belt or chain-drive opener draws 4 to 6 A and 480 to 720 W, a wall-mount jackshaft 3 to 5 A — plus a table on what else lives on the garage branch that ceiling receptacle belongs to.
A fan-forced garage heater comes in two very different circuits. The mounted 240-volt version is hardwired, drawing 20 to 30 amps for 5,000 to 7,000 watts.
A hybrid heat-pump water heater runs on 240 volts, wired directly, and draws anywhere from 15 to 30 amps for 500 to 4,500 watts behind a 30-amp breaker — the.
A hot-water recirculating pump is one of the smallest loads in the house, running on 120 volts at just 1 to 2 amps through a 5-15R outlet on a 15-amp branch.
A compact mini fridge draws 1 to 2 A and 85 to 150 W on an ordinary 15 A branch, a counter-height unit 2 to 3 A — plus a table on what may share that outlet, power strips and extension cords included.
A pellet stove is really an electric appliance that burns fuel, running on 120 volts through a 5-15R outlet on a 15-amp branch.
A pond or fountain pump runs on 120 volts through a ground-fault 5-15R or 5-20R outlet on a 15 to 20-amp branch.
A 240-volt in-ground pool pump draws 10 to 12 A for 2,400 to 2,880 W on a 20 A ground-fault-protected circuit, an above-ground 120-volt pump 8 to 12 A — plus what the wet location demands beyond the breaker.
A single-hose portable AC draws 10 to 12 A at 120 V and a dual-hose 11 to 13 A — plus a table on what the room circuit you are plugging into is already carrying, and where it gives out.
A plug-in induction cooktop runs on 120 volts through a 5-15R or 5-20R outlet. A single-burner unit draws 12 to 15 amps for 1,440 to 1,800 watts on a 15 to.
Electric radiant floor heating is a resistive cable or mat under the tile, wired directly to a ground-fault floor thermostat rather than any outlet.
A home sauna heater is a heavy 240-volt load wired directly to a controller outside the hot room, with no plug.
A sewage ejector pump lifts waste from a below-floor basin up to the main drain. A 120-volt ejector draws 7 to 12 amps for 840 to 1,440 watts on a 15 to.
A portable space heater is a heavy 120-volt load for its size, drawing 11 to 13 amps for 1,300 to 1,500 watts on a 15 to 20-amp branch through a 5-15R.
A sump pump runs on 120 volts through a 5-15R outlet. A submersible unit draws 6 to 10 amps for 700 to 1,200 watts on a 15 to 20-amp branch, while a pedestal.
A gas tankless heater does its warming with a burner but still needs a trickle of 120-volt power through a 5-15R outlet on a 15-amp branch.
A fan-forced wall heater is a recessed unit wired straight to its own thermostat, never plugged in.
A welder runs on 240 volts and draws its rated current only in short arcs. A stick welder pulls 40 to 48 amps for 9,600 to 11,520 watts on a 50-amp circuit.
A well pump is wired through a pressure switch, not a plug. A 240-volt submersible pump hangs down the casing and draws 8 to 13 amps for 1,920 to 3,120 watts.
A whirlpool tub sits full of water beside its motor, so its circuit is ground-fault protected and dedicated.
A furnace-mounted humidifier draws current according to how it makes moisture, all on 120 volts through a 5-15R outlet.
A whole-house fan is a gentle 120-volt load on a 5-15R outlet. The belt-drive style draws 3 to 6 amps for 360 to 720 watts on a 15 to 20-amp branch, while a.
Bosch dishwasher leaking? On Bosch it is usually aquaStop leak detection triggering from condensation on the base pan, not the generic cause.
Bosch dishwasher not draining? On Bosch it is usually drain pump impeller blockage from glass shards or hard food debris, not the generic cause.
Bosch dishwasher won't start? On Bosch it is usually aquaStop base-pan flood switch tripped, not the generic cause. Brand-specific fixes, DIY checks and...
Let our professional technicians help. Same-day service available.