Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300

Hisense refrigerator showing E1? The fresh-food temperature sensor has failed. Learn why the fridge still feels cold, the likely part, and the E1 repair cost.

Hisense refrigerator showing E2 with a warming freezer? The freezer sensor has failed, often from frost. Learn the defrost connection and the E2 repair cost.

Hisense refrigerator showing E4 with both sides warming? The defrost circuit has failed and ice is blocking airflow. Learn the safe thaw and the E4 repair cost.

Hisense refrigerator showing Ed with a blank panel? The display-to-board link has failed. Learn why the door hinge is the first suspect and the Ed repair cost.

Hisense refrigerator showing EF with a warm fridge but cold freezer? The evaporator fan has failed. Learn why a spinning fan can still fault and the EF cost.

Count the seconds between pressing Start and E3 appearing. On a Hisense PTC door lock, an instant E3 and one that arrives after a pause are two different faults, and only one of them is a part you buy.

Hisense washer overfilling with water at the door glass and an E4 code? The level reading is off. Learn the pressure-hose and inlet-valve checks, and what an E4 repair costs.

Hisense washer drum not turning, stopping early with an E6 code? The drive motor circuit has failed. Learn the spin-by-hand check, the hall-sensor clue, and what an E6 repair costs.

F1E1 on a JennAir Dishwasher means water temperature sensor (thermistor) open. Repair cost $90–$220: likely causes, DIY checks, and when to call a technician.

F1E2 on a JennAir Dishwasher means water temperature sensor (thermistor) shorted. Repair cost $90–$220, likely causes, and safe DIY checks.

F2E1 on a JennAir Dishwasher means stuck key / user interface fault. Repair cost $130–$290, likely causes, safe DIY checks, and when to call a technician.

JennAir dishwasher panel dark or resetting on its own with an F2E2 code? The user-interface board has faulted. Learn the ribbon reseat that often fixes it, and what it costs.

F3E1 on a JennAir Dishwasher means optical water indicator (owi) sensor fault. Repair cost $110–$260: likely causes, DIY checks, and when to call a technician.

JennAir dishwasher won't start, or quits within seconds, with an F5E1 code? The door switch is not confirming closed. Learn the latch checks, the panel-ready clue, and the cost.

JennAir dishwasher door springing back open, or blocked by the rack, with an F5E2 code? The door cannot reach the latched position. Learn the quick rack check and the repair cost.

JennAir dishwasher over- or under-filling with an F6E4 code during the fill? The flow meter is miscounting. Learn why hard water is usually to blame and what the repair costs.

F7E1 on a JennAir Dishwasher means wash (circulation) motor fault. Repair cost $180–$420, likely causes, safe DIY checks, and when to call a technician.

F8E1 on a JennAir Dishwasher means slow or insufficient water fill. Repair cost $120–$300, likely causes, safe DIY checks, and when to call a technician.

F1E0 on a JennAir Oven/Range means control board eeprom read / write failure. Repair cost $225–$475: likely causes, DIY checks, and when to call a technician.

F2E0 on a JennAir Oven/Range means shorted keypad (touchpad). Repair cost $150–$350, likely causes, safe DIY checks, and when to call a technician.

F2E1 on a JennAir Oven/Range means keypad ribbon disconnected or unresponsive. Repair cost $130–$300: likely causes, DIY checks, and when to call a technician.

F3E0 on a JennAir Oven/Range means oven temperature sensor open. Repair cost $75–$190, likely causes, safe DIY checks, and when to call a technician.

F3E2 on a JennAir Oven/Range means oven temperature sensor shorted. Repair cost $75–$195, likely causes, safe DIY checks, and when to call a technician.

F5E1 on a JennAir Oven/Range means self-clean door lock will not lock. Repair cost $140–$300, likely causes, safe DIY checks, and when to call a technician.

F5E2 on a JennAir Oven/Range means self-clean door lock will not unlock. Repair cost $140–$300, likely causes, safe DIY checks, and when to call a technician.

F6E0 on a JennAir Oven/Range means gas oven ignition / safety valve circuit fault. Repair cost $150–$340, likely causes, and safe DIY checks.

JennAir oven door stuck locked hours after a clean cycle, showing F9E0? The lock motor stalled. Learn the safe wait, the manual release, and what this repair costs.

Kenmore Dishwasher F1E1 error code — water temperature sensor fault. A senior technician explains what to check, when to call a pro, typical pricing, and how to weigh repair against a new machine.

Kenmore Dishwasher F2E2 error code — console keypad reading a stuck key. A senior technician explains what to check, when to call a pro, typical pricing, and how to weigh repair against a new machine.

Kenmore Dishwasher F6E1 error code — water not filling. A senior technician explains what to check, when to call a pro, typical pricing, and how to weigh repair against a new machine.
Let our professional technicians help. Same-day service available.