Expert advice, troubleshooting guides, and maintenance tips for all your appliances
5,493 articles
Or call (415) 795-7300

What a washer water inlet valve replacement costs, why the price ranges as it does, and whether the fix is worth it over buying new.

Heat-pump dryer struggling to dry in a cold room? These machines need a warm enough space to work. Ranked causes, safe DIY checks and when it is a fault, not the cold.

Heat-pump dryer not tumbling the drum? Usually a snapped or slipped drive belt, but a motor, capacitor, or seized bearing can do it. Ranked causes and when to call a pro.

Heat-pump dryer leaking water onto the floor? Usually an overfull or cracked condensate tank, or a blocked drain path. Ranked causes, safe DIY checks and when to call a pro.

Heat-pump dryer smelling musty or damp? Usually mildew on the cool heat exchanger or a standing condensate tank. Ranked causes, safe DIY checks and when to call a technician.

Heat-pump dryer making a loud noise? Some sounds are the normal compressor and pump; others point to a roller or debris. Ranked causes, safe checks and when to call a pro.

Heat-pump dryer stopping partway through a cycle? Usually a full condensate tank, an airflow trip on choked filters, or an over-temperature pause. Ranked causes and DIY checks.

Heat-pump dryer tripping the breaker? Often an overloaded or shared circuit, but a failing compressor or moisture in the wiring can also do it. Ranked causes and when a pro is needed.

Heat-pump dryer not starting? Usually the door is not fully latched, the water tank is full, or a lock is set. Ranked causes, safe DIY checks and when to call a technician.

Induction cooktop showing dE? It is running in showroom demo mode, so the panel lights but the zones never heat. Here is how to exit demo mode and when to call a pro.

Induction cooktop showing F0? The control board is reading a key as permanently pressed and has locked out. Here are the causes, safe DIY checks and when to call a pro.

Induction cooktop showing F1? The control board found an internal fault it cannot pin to a key or sensor. Here are the causes, the one safe DIY check and when to call a pro.

Induction cooktop showing F2? A zone or the surface ran past its safe temperature and cut power. Here are the causes, safe DIY checks and when it needs a technician.

Induction cooktop showing F5? The control board failed its own start-up self-test, so the board hardware is faulty. Here is the one safe DIY check and when to call a pro.

Induction cooktop showing F8? A control-board relay has failed, usually after a power surge or brown-out. Here are the causes, the safe DIY check and when a pro is needed.

Why do R-600a refrigerators use spark-free parts? Because the charge is flammable, parts near the refrigerant are sealed or spark-free so a rare leak cannot ignite. Here is what that means.

Does an R-600a fridge need a special compressor? Yes — a hydrocarbon-rated compressor with matched oil, never an R-134a substitute. Here is why, and why it is a certified-tech job.

How do you safely dispose of an R-600a fridge? Recycle it so the flammable charge is recovered — never puncture the sealed system yourself. Here is how, and who handles it.

Can you retrofit R-600a into an R-134a refrigerator? No — the pressures, charge, oil and electrical safety all differ. Here is why, and what actually needs a certified tech.

Heat-pump dryer ending the auto cycle too early? Usually a film on the moisture-sensor contacts reading the load as dry too soon. Ranked causes, safe checks, and when to call a technician.

Heat-pump dryer beeping repeatedly? Usually a full water-tank alert or the finish chime, not a fault. Ranked causes, safe checks, and when a beep means a technician.

Heat-pump dryer giving off a burning smell? Usually lint scorching on warm parts, but stop and unplug it first. Ranked causes, safe checks, and when to call a technician.

Heat-pump dryer clean-filter light still on after cleaning? Usually a damp or misfitted filter, or the condenser also needs a rinse. Ranked causes, safe checks, and when to call a technician.

Heat-pump dryer leaving clothes wrinkled? Usually a load left sitting in the drum or an overloaded drum, plus the gentler heat. Ranked causes, safe checks, and when to call a technician.

Heat-pump dryer leaving lint on clothes? Usually filters not rinsed between loads, a torn filter, or a stray tissue. Ranked causes, safe checks, and when to call a technician.

Heat-pump dryer not draining through the drain hose? Usually a kinked hose, one routed too high, or a diverter left in tank mode. Ranked causes, safe checks, and when to call a technician.

Heat-pump dryer adding to the time remaining? Usually normal auto-sensing recalculation, not a fault. Ranked causes, safe checks, and when a rising timer means a technician.

Heat-pump dryer vibrating or shaking? Usually unlevel feet or an unbalanced load, both quick DIY fixes. Ranked causes, safe checks, and when a wobble needs a technician.

Heat-pump dryer leaving the water tank empty? Usually a drain hose is fitted, or the load was small, not a fault. Ranked causes, safe checks, and when to call a technician.

What is the AIM Act and how is it changing refrigerators? A US phasedown of high-GWP HFCs that moved new fridges to low-GWP R-600a. The facts, what it means for owners, and when to call a technician.
Let our professional technicians help. Same-day service available.