How much does a oven control knob replacement cost?#
A oven control knob replacement typically costs $70 to $160, with most jobs around $115. The control knob is what handles holding an even bake-and-broil temperature. When it fails, a bake that never quite reaches temperature is usually the first clue, and on a oven that is not a fault you can safely ignore for long. What decides the low or high end is part quality, access difficulty, and how much diagnostic time the fault demands. On this job the part drives the price more than the bench time does. Against $650–$3,000 for a new oven, that keeps a repair the cheaper move on a unit that is otherwise sound.
Oven control knob replacement cost
- What it does: the control knob is the knob you turn to set a burner or the oven.
- Signs it is failing: a knob that spins freely, cracks, or will not turn the valve.
- The repair job: replacing the knob and checking the valve stem it rides on.
- DIY or pro: an easy owner repair on most models.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $70 |
| Typical repair | $115 |
| Premium part or hard access | $160 |
| A new oven, installed | $650–$3,000 |
Against a new oven at $650–$3,000 installed, a control knob repair at $70–$160 is usually the cheaper fix — unless the oven is already old or has other faults.
Pro note: a tech checks the valve stem behind the knob, because a stripped stem chews up a fresh knob just as fast.
Is replacing the control knob on a oven worth it?#
On a newer or premium oven, replacing the control knob is worth it — $70 to $160 is well under the $650 to $3,000 a new one costs, and a unit from Wolf or Thermador is worth keeping in service. With dinner and holiday cooking on hold, a scheduled repair beats limping along or shopping in a hurry. The job stops making sense only on a basic unit past about 10 years, where the repair starts to rival the price of a replacement once the specialized labor is added.
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Oven Control knob replacement cost: FAQ#
How much does a oven control knob replacement cost?#
Most jobs run $70 to $160, with $115 the common figure once parts and labor are counted.
Is replacing the control knob on a oven worth it?#
Yes on a sound or higher-end oven: $70–$160 stays well below $650–$3,000. Once the unit is near the end of its life, buying new is the better spend.
What makes the control knob fail on a oven?#
The control knob usually gives out from normal wear, heat, and electrical stress over years of use.
Can I replace a oven control knob myself?#
No — it means opening the sealed refrigerant system, which by law needs certified recovery equipment, so it is strictly a professional repair.
How long does a oven control knob replacement take?#
Expect a half-day. Recovering the old refrigerant, fitting the new part, evacuating the system, and recharging it all take time and cannot be rushed.
Appliance Repair Technician & Diagnostics Specialist · 10 years experience
Electronics and diagnostics specialist with 10 years of experience in modern smart appliance repair, specializing in LG and Samsung.
