How much does a ice maker water inlet valve replacement cost?#
Plan on $105 to $205 for a ice maker water inlet valve replacement, and about $155 for a straightforward job. The water inlet valve is what handles cycling water into fresh batches of ice. When it fails, an empty bin with no fresh batch overnight is usually the first clue, and on a ice maker that is not a fault you can safely ignore for long. The spread comes down to the brand, the part quality, and how buried the component sits. You are paying more for access and leak-testing than for the valve, which is a low-cost part. Against $150–$2,500 for a new ice maker, that keeps a repair the cheaper move on a unit that is otherwise sound.
Ice Maker water inlet valve replacement cost
- What it does: the water inlet valve lets water into the machine on demand.
- Signs it is failing: no fill, a slow fill, or a unit that keeps filling.
- The repair job: testing the valve coils, swapping the valve, and checking for leaks.
- DIY or pro: a moderate DIY job once the water is shut off.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $105 |
| Typical repair | $155 |
| Premium part or hard access | $205 |
| A new ice maker, installed | $150–$2,500 |
Against a new ice maker at $150–$2,500 installed, a water inlet valve repair at $105–$205 is usually the cheaper fix — unless the ice maker is already old or has other faults.
Pro note: a tech checks the inlet screen for sediment first, since a clogged screen fakes a failed valve and cleans up for nothing.
Is replacing the water inlet valve on a ice maker worth it?#
Replacing the water inlet valve pays off whenever the ice maker is otherwise sound: $105–$205 beats the $150 to $2,500 of buying new, and it spares you delivery and haul-away on top. With the ice supply cut off, most owners would rather fix a Scotsman- or U-Line-tier unit than replace it; if instead it is past roughly 10 years and carrying other faults, put the money toward a replacement — a single fix rarely rescues a tired machine.
Do You Have the Right Tools?
Multimeter ($85), vacuum pump ($250), diagnostic software, and specialized hand tools. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ice Maker Water inlet valve replacement cost: FAQ#
How much does a ice maker water inlet valve replacement cost?#
Plan on $105–$205 all in; $155 is what a straightforward one costs.
Is replacing the water inlet valve on a ice maker worth it?#
Yes on a sound or higher-end ice maker: $105–$205 stays well below $150–$2,500. Once the machine is near the end of its life, buying new is the better spend.
What makes the water inlet valve fail on a ice maker?#
The water inlet valve usually gives out from sediment clogging the screen, a worn solenoid coil, and mineral buildup that keeps it from sealing.
Can I replace a ice maker water inlet valve myself?#
Yes, a moderate DIY job for a handy owner once the power and water is shut off. If the diagnosis is uncertain, a technician confirms it fast and warranties the fix.
How long does a ice maker water inlet valve replacement take?#
For a prepared tech it is an hour-or-two job — a little longer if the part is buried or the panel is awkward to reach.
Appliance Repair Technician · 11 years experience
Experienced technician with 11 years specializing in Frigidaire and Electrolux refrigerator and dryer repair with a focus on safety.


