Ice Maker Control Board Replacement Cost

How much does a ice maker control board replacement cost?#

A ice maker control board replacement typically costs $180 to $450, with most jobs around $315. The control board is what handles cycling water into fresh batches of ice. When it fails, an empty bin with no fresh batch overnight is usually the first clue, and on a ice maker that is not a fault you can safely ignore for long. What decides the low or high end is whether the part is factory-original or aftermarket and how hard the unit is to open. The labor here is short; you are mostly paying for the board and for a correct diagnosis, since a mis-called board is money wasted. Against $150–$2,500 for a new ice maker, that keeps a repair the cheaper move on a unit that is otherwise sound.

Ice Maker control board replacement cost

• What it does: the control board runs the electronics and cycle logic.
• Signs it is failing: a dead panel, unresponsive buttons, or cycles that quit partway.
• The repair job: diagnosing the board, fitting an OEM replacement, and confirming every cycle.
• DIY or pro: usually a technician job — a wrong board or a missed reprogram wastes the part.

Against a new ice maker at $150–$2,500 installed, a control board repair at $180–$450 is usually the cheaper fix — unless the ice maker is already old or has other faults.

Pro note: a technician rules out a failed door switch or a loose harness before condemning the board, since those mimic a dead board for far less money.

Is replacing the control board on a ice maker worth it?#

On a newer or premium ice maker, replacing the control board is worth it — $180 to $450 is well under the $150 to $2,500 a new one costs, and a unit from Scotsman or U-Line is worth keeping in service. With the ice supply cut off, a scheduled repair beats limping along or shopping in a hurry. The job stops making sense only on a basic unit past about 10 years, where the repair starts to rival the price of a replacement and other parts are wearing out too.

Ice Maker Control board replacement cost: FAQ#

How much does a ice maker control board replacement cost?#

Most jobs run $180 to $450, with $315 the common figure once parts and labor are counted.

Is replacing the control board on a ice maker worth it?#

Yes on a sound or higher-end ice maker: $180–$450 stays well below $150–$2,500. Once the unit is near the end of its life, buying new is the better spend.

What makes the control board fail on a ice maker?#

The control board usually gives out from power surges, ambient heat and moisture, and failed relays or cracked solder joints on the board.

Can I replace a ice maker control board myself?#

Best left to a pro: a mis-diagnosed or unprogrammed board just burns the part, so the labor you save rarely pays off.

How long does a ice maker control board replacement take?#

A technician usually wraps it up in an hour or two, most of which is diagnosis, access, and confirming the unit runs correctly afterward.