Ice Maker Ejector Motor Replacement Cost

How much does a ice maker ejector motor replacement cost?#

A ice maker ejector motor replacement typically costs $120 to $250, with most jobs around $185. The ejector motor is what handles cycling water into fresh batches of ice. When it fails, an empty bin with no fresh batch overnight is usually the first clue, and on a ice maker that is not a fault you can safely ignore for long. What decides the low or high end is part quality, access difficulty, and how much diagnostic time the fault demands. Expect the labor to lead here: the part is cheap, but getting to a buried motor is what takes the time. Against $150–$2,500 for a new ice maker, that keeps a repair the cheaper move on a unit that is otherwise sound.

Ice Maker ejector motor replacement cost

• What it does: the ejector motor drives the arm that pushes finished ice out of the mold.
• Signs it is failing: ice that freezes but never drops, or an arm stuck partway through a cycle.
• The repair job: replacing the ejector motor and confirming a full harvest cycle.
• DIY or pro: a moderate DIY job inside the ice-maker head.

Against a new ice maker at $150–$2,500 installed, a ejector motor repair at $120–$250 is usually the cheaper fix — unless the ice maker is already old or has other faults.

Pro note: a tech checks the mold thermostat and bail arm first, since a stalled harvest often traces to those, not the motor.

Is replacing the ejector motor on a ice maker worth it?#

On a newer or premium ice maker, replacing the ejector motor is worth it — $120 to $250 is well under the $150 to $2,500 a new one costs, and a unit from Scotsman or U-Line is worth keeping in service. With the ice supply cut off, a scheduled repair beats limping along or shopping in a hurry. The job stops making sense only on a basic unit past about 10 years, where the repair starts to rival the price of a replacement and other parts are wearing out too.

Ice Maker Ejector motor replacement cost: FAQ#

How much does a ice maker ejector motor replacement cost?#

Plan on $120–$250 all in; $185 is what a straightforward one costs.

Is replacing the ejector motor on a ice maker worth it?#

Yes on a sound or higher-end ice maker: $120–$250 stays well below $150–$2,500. Once the unit is near the end of its life, buying new is the better spend.

What makes the ejector motor fail on a ice maker?#

The ejector motor usually gives out from worn bearings, a shaft seized by debris, or a burnt winding after years of runtime.

Can I replace a ice maker ejector motor myself?#

Yes, a moderate DIY job for a handy owner once the power is shut off. If the diagnosis is uncertain, a technician confirms it fast and warranties the fix.

How long does a ice maker ejector motor replacement take?#

For a prepared tech it is an hour-or-two job — a little longer if the part is buried or the panel is awkward to reach.