How much does a gas stove control knob replacement cost?#
A gas stove control knob replacement typically costs $80 to $170, with most jobs around $125. The control knob is what handles lighting the surface burners and firing the oven. When it fails, a burner that clicks without catching is usually the first clue, and on a gas stove that is not a fault you can safely ignore for long. What decides the low or high end is whether the part is factory-original or aftermarket and how hard the unit is to open. On this job the part drives the price more than the bench time does. Against $650–$2,800 for a new gas stove, that keeps a repair the cheaper move on a unit that is otherwise sound.
Gas Stove control knob replacement cost
- What it does: the control knob is the knob you turn to set a burner or the oven.
- Signs it is failing: a knob that spins freely, cracks, or will not turn the valve.
- The repair job: replacing the knob and checking the valve stem it rides on.
- DIY or pro: an easy owner repair on most models.
| What you pay for | Typical cost |
|---|---|
| Part plus basic labor | $80 |
| Typical repair | $125 |
| Premium part or hard access | $170 |
| A new gas stove, installed | $650–$2,800 |
Against a new gas stove at $650–$2,800 installed, a control knob repair at $80–$170 is usually the cheaper fix — unless the gas stove is already old or has other faults.
Pro note: a tech checks the valve stem behind the knob, because a stripped stem chews up a fresh knob just as fast.
Is replacing the control knob on a gas stove worth it?#
Replacing the control knob pays off whenever the gas stove is otherwise sound: $80–$170 beats the $650 to $2,800 of buying new, and it spares you delivery and haul-away on top. With the whole cooktop and oven out of action, most owners would rather fix a Wolf- or Viking-tier unit than replace it; if instead it is past roughly 10 years and carrying other faults, put the money toward a replacement — a single fix rarely rescues a tired machine.
Do You Have the Right Tools?
Multimeter ($85), vacuum pump ($250), diagnostic software, and specialized hand tools. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Gas Stove Control knob replacement cost: FAQ#
How much does a gas stove control knob replacement cost?#
Plan on $80–$170 all in; $125 is what a straightforward one costs.
Is replacing the control knob on a gas stove worth it?#
Yes on a sound or higher-end gas stove: $80–$170 stays well below $650–$2,800. Once the machine is near the end of its life, buying new is the better spend.
What makes the control knob fail on a gas stove?#
The control knob usually gives out from normal wear, heat, and electrical stress over years of use.
Can I replace a gas stove control knob myself?#
No — it means opening the sealed refrigerant system, which by law needs certified recovery equipment, so it is strictly a professional repair.
How long does a gas stove control knob replacement take?#
Expect a half-day. Recovering the old refrigerant, fitting the new part, evacuating the system, and recharging it all take time and cannot be rushed.
Appliance Repair Technician · 11 years experience
Experienced technician with 11 years specializing in Frigidaire and Electrolux refrigerator and dryer repair with a focus on safety.
