Gas Stove Control Board Replacement Cost

How much does a gas stove control board replacement cost?#

Replacing the control board on the unit runs $200–$600 ($400 is the usual figure). The control board is what handles lighting the surface burners and firing the oven. When it fails, a burner that clicks without catching is usually the first clue, and on a gas stove that is not a fault you can safely ignore for long. Where a given quote lands depends on whether the part is factory-original or aftermarket and how hard the unit is to open. Nearly all of the cost is the board itself — fitting it takes under an hour, but sourcing the right part and reprogramming it is the fussy part. Against $650–$2,800 for a new gas stove, that keeps a repair the cheaper move on a unit that is otherwise sound.

Gas Stove control board replacement cost

• What it does: the control board runs the electronics and cycle logic.
• Signs it is failing: a dead panel, unresponsive buttons, or cycles that quit partway.
• The repair job: diagnosing the board, fitting an OEM replacement, and confirming every cycle.
• DIY or pro: usually a technician job — a wrong board or a missed reprogram wastes the part.

Against a new gas stove at $650–$2,800 installed, a control board repair at $200–$600 is usually the cheaper fix — unless the gas stove is already old or has other faults.

Pro note: a technician rules out a failed door switch or a loose harness before condemning the board, since those mimic a dead board for far less money.

Is replacing the control board on a gas stove worth it?#

Replacing the control board pays off whenever the gas stove is otherwise sound: $200–$600 beats the $650 to $2,800 of buying new, and it spares you delivery and haul-away on top. With the whole cooktop and oven out of action, most owners would rather fix a Wolf- or Viking-tier unit than replace it; if instead it is past roughly 10 years and carrying other faults, put the money toward a replacement — a single fix rarely rescues a tired machine.

Gas Stove Control board replacement cost: FAQ#

How much does a gas stove control board replacement cost?#

Between $200 and $600 for parts and labor, and about $400 on a typical unit.

Is replacing the control board on a gas stove worth it?#

Yes on a sound or higher-end gas stove: $200–$600 stays well below $650–$2,800. Once the machine is near the end of its life, buying new is the better spend.

What makes the control board fail on a gas stove?#

The control board usually gives out from power surges, ambient heat and moisture, and failed relays or cracked solder joints on the board.

Can I replace a gas stove control board myself?#

It is usually a technician job — a wrong part or a missed reprogramming step wastes it, so most owners let a pro handle the diagnosis.

How long does a gas stove control board replacement take?#

Figure an hour or two for a pro — the swap is quick, but pinning the fault and verifying the fix take the bulk of the time.