Frigidaire Gas Stove Keeps Clicking Repair Guide

Keeps clicking has a handful of usual causes on Frigidaire gas stoves. This guide ranks them by likelihood so you can narrow it down fast instead of swapping parts at random.

Quick diagnosis#

Most likely: moisture on igniter (most common). Mechanically, water or liquid on the spark igniter electrode sets up a short circuit that kicks off constant clicking. This commonly happens after boil-overs, spills, or aggressive cleaning with water. If that checks out, look next at food debris around igniter.

Safety first#

Unplug the stove or turn off the breaker.

The usual suspects#

The table below ranks what typically drives this, with the tell for each:

Checks you can do first#

Take the causes above one at a time, starting at the top of the table.

1. Moisture on Igniter (Most Common)#

Water or liquid on the spark igniter electrode creates an electrical short that triggers nonstop clicking. This commonly happens after boil-overs, spills, or aggressive cleaning with water. The fix is simple: remove the burner cap, blot up visible moisture, and let the area dry completely. Check the element or igniter for visible damage and continuity before replacing it.

2. Food Debris Around Igniter#

The short version: grease and food residue around the igniter electrode can conduct electricity, triggering the spark signal even when the switch isn't engaged. Clean around the electrode base with a dry cloth or old toothbrush. Remove any carbonized food that's bridging the gap between the electrode and the burner. With power off, test the heating component for continuity; an open reading means no heat is being produced.

3. Faulty Spark Module#

An internally shorted spark module can fire continuously on one or all channels. If drying and cleaning don't fix the clicking, the spark module is the likely culprit. The spark module distributes voltage to all igniters. Reseat the board’s connectors and inspect for burned relays; board faults usually need a replacement, not a repair.

4. Damaged Igniter Wiring#

Put simply, frayed or degraded wiring between the spark module and the igniter electrode can short-circuit, triggering constant sparking. Examine for wires touching metal surfaces, melted insulation from heat exposure, or rodent damage. With power off, test the heating component for continuity; an open reading means no heat is being produced.

5. Stuck Igniter Switch#

Each burner knob has a micro switch that activates the spark when turned to the "light" position. If this switch sticks in the on position (due to grease buildup, mechanical wear, or spring fatigue), the spark fires continuously regardless of knob position. Rapidly clicking the knob on-off several times may free a stuck fast switch. Test the switch with a meter in both positions — no change means it’s the fault.

6. Dry the burner area#

Behind the scenes, remove the burner cap and head. Blot up any visible moisture. Use a fan or cool hair dryer to accelerate drying. With the unit unplugged, inspect this part for visible wear or a loose connection and test it before replacing.

Quick recap#

If you only remember one thing, work the causes in this order:

• Moisture on Igniter (Most Common) — most common; with power off, test the heating component for continuity.
• Food Debris Around Igniter — common; check the element or igniter for visible damage and continuity before replacing it.
• Faulty Spark Module — fairly common; try a hard reset first — unplug for a minute — then look for scorched spots or swollen parts on the board.
• Damaged Igniter Wiring — occasional; check the element or igniter for visible damage and continuity before replacing it.
• Stuck Igniter Switch — less common; confirm the switch clicks and shows continuity when actuated.

What fixing it usually involves#

Most repairs here come down to isolating the bad component, replacing it with the correct part for your model, and confirming the symptom is gone on a test run. Expect the moisture on igniter (most common) to be first in line.

Keeping it from coming back#

Most of these faults are wear-driven, so periodic cleaning and gentle use stretch the time between repairs on your Frigidaire gas stove.

When to bring in a technician#

Call a technician if the symptom persists after the checks above, if the repair means reaching power, gas, or sealed components, or if your Frigidaire gas stove is still under warranty — DIY work can void it. Actual cost depends on which part is at fault and your model, so a quick diagnostic settles it before any work starts.

Still stuck after these checks? Book an EasyBear technician — we service Frigidaire gas stoves and carry the common parts on the truck.