Verified
“Built-in microwave stopped heating. Magnetron was gone. Tech sourced OEM part and installed next day. Saved us from replacing the whole unit.”
Steven V.
Microwave Repair
Microwave plate not rotating? We fix turntable motors, couplers, and guides. Same-day service, 90-day warranty. Average repair cost: $80–$200. Some causes are DIY-fixable — see below.
Broken drive coupler
Failed turntable motor
Damaged roller guide
The plastic coupler connects the motor shaft to the glass tray. It wears, cracks, or strips from normal use. Heavy ceramic dishes (popular in Bay Area households) place excessive torque on the coupler. Spilled liquids seep underneath and cause the coupler to swell and crack.
Cost: $60–$100 | Time: 20-30 minutes
The small synchronous motor that drives the turntable burns out from age or overload. In Bay Area homes with voltage fluctuations from older PG&E infrastructure, motors receive inconsistent power that causes premature failure. The microwave still heats but food cooks unevenly without rotation.
Cost: $80–$180 | Time: 45-75 minutes
The roller ring supports the glass tray and distributes weight. Warped or cracked rollers from heat or spilled sugar prevent smooth rotation, causing the motor to stall. In compact Bay Area kitchens where microwaves double as counter space, heavy items placed on the closed door stress the ring.
Cost: $40–$80 | Time: 15-25 minutes
The control board sends power to the turntable motor. A failed relay on the board, or a faulty door switch that partially disables the cooking cycle, can stop only the turntable while other functions work. Power surges in older Bay Area electrical systems can damage specific board relays.
| Detail | Range |
|---|---|
| Diagnostic | Free |
| Typical repair cost | $80–$200 |
| Repair time | 45 min-1 hour |
| Warranty | 90 days parts + labor |
Cost varies by root cause. Exact quote after free diagnostic visit.
Free diagnostic visit for turntable not spinning issues. Same-day appointments available in Bay Area.
Book Free DiagnosticReviewed by Marcus Rivera, Senior Refrigeration & HVAC Technician
Built-in GE microwave was sparking inside our Santa Clara kitchen. Technician identified a cracked waveguide cover and replaced it along with the magnetron. Heats evenly with no sparking whatsoever.
“Built-in microwave stopped heating. Magnetron was gone. Tech sourced OEM part and installed next day. Saved us from replacing the whole unit.”
“Built-in microwave stopped heating. Magnetron was gone. Tech sourced OEM part and installed next day. Saved us from replacing the whole unit.”
“Our built-in KitchenAid microwave stopped heating. The technician diagnosed a failed magnetron and replaced it without removing the unit from the cabinet. Saved us from having to buy a new built-in…”
“Our over-the-range GE microwave stopped heating completely. The tech replaced the diode and tested the magnetron to make sure it was still good. $155 for the repair versus $500+ for a new one…”
“Sarah fixed the microwave magnetron but it took almost 2 hours and cost $280. The microwave works again but honestly at that price I wonder if I should have just bought a new one.”
Control board issue
Worn drive bushing
Cost: $120–$250 | Time: 45-90 minutes
Microwave Door Won't Latch
$80–$200 avg
Our Sub-Zero fridge stopped cooling right before a dinner party in our Noe Valley home. The technician arrived within two hours, diagnosed a faulty compressor relay, and had it running perfectly before guests arrived.
Bosch dishwasher was leaking onto our hardwood floors in Rockridge. EasyBear sent someone same-day who replaced the door gasket and checked the drain pump — completely fixed and no water damage.
Verified reviews from homeowners across San Francisco and Bay Area
“Sub-Zero 36-inch built-in with a noisy compressor. Compressor mounts were worn causing vibration. Mounts replaced and compressor serviced for $295. Fridge is quiet and cooling perfectly. Sub-Zero expertise is rare and valuable.”
Tammy B.
Refrigerator Repair
Palo Alto, CA
“Our Samsung dishwasher was leaking from the bottom. The technician found a loose hose clamp on the circulation pump. It was a simple fix for $120 — I really appreciated the honesty since they could have sold me a new pump. The dishwasher has been leak-free since. Trustworthy company.”
Yuki N.
Dishwasher Repair
San Mateo, CA
“KitchenAid built-in refrigerator was forming puddles underneath. Clogged defrost drain was sending water out the bottom instead of into the drain pan. The tech cleared the drain, added a drain heater clip to prevent recurrence, and cleaned the drain pan. $175 for a fix that eliminated a really annoying problem.”
Alicia R.
Refrigerator Repair
Palo Alto, CA
“Our LG French door refrigerator stopped cooling overnight. With a fridge full of food, we needed emergency service. The tech came same-day, diagnosed a failed compressor relay, and had it running in under an hour. He also told us about LG's compressor warranty which covered the part. Outstanding service.”
Anthony R.
Refrigerator Repair
Sunnyvale, CA
“Our 20-year-old Sub-Zero had a warm refrigerator section. The tech was clearly experienced with Sub-Zero — he diagnosed a failing evaporator fan and weak door gaskets. Replaced both, cleaned the condenser, and the unit is performing like new. $520 for a repair on a unit worth $15K+ to replace. No-brainer.”
Richard Y.
Refrigerator Repair
Cupertino, CA
“Called EasyBear on a Sunday morning when my Samsung fridge stopped cooling. A technician arrived by early afternoon, diagnosed a failed evaporator fan motor, and had it replaced within 90 minutes. Food saved, stress gone. The $265 was absolutely worth it.”
Karen L.
Refrigerator Repair
San Francisco, CA
“Whirlpool fridge compressor running non-stop. Dirty condenser coils were the culprit. Thorough cleaning for $95 service fee. Compressor now cycles normally and energy bill dropped.”
Dave K.
Refrigerator Repair
Daly City, CA
“The technician arrived within 2 hours of my call and diagnosed the issue immediately — a faulty defrost timer causing ice buildup. He had the part on his truck and fixed it in under an hour. My fridge has been running perfectly for 3 months now. Very reasonable price at $275.”
Sarah M.
Refrigerator Repair
San Francisco, CA
“GE upright freezer was running but not getting below 25°F. The evaporator fan motor was failing. Tech replaced it and also checked the defrost system which was still working fine. $210 total and the freezer is back to 0°F. Saved about $800 in frozen food that would have spoiled. Worth every penny.”
Raymond G.
Freezer Repair
San Francisco, CA
“Our chest freezer stopped freezing and we had hundreds of dollars of meat inside. Called at 8am and the tech arrived by 10:30am. Faulty thermostat was the culprit — replaced in 30 minutes. Saved all our food! Cost was $175. Can't thank them enough for the fast response.”
Amanda J.
Freezer Repair
Concord, CA
“Finding someone experienced with Sub-Zero was tough until I found this company. Our 15-year-old Sub-Zero was running constantly and not cooling. The tech cleaned the condenser, replaced the fan motor, and it's been running like new. Worth every penny of the $450 repair — a new Sub-Zero is $12,000+.”
James C.
Refrigerator Repair
Berkeley, CA
“The notorious Samsung ice maker problem struck our French door fridge. The tech was very familiar with this specific issue, performed the recommended fix including defrosting the evaporator and installing a new ice maker kit. It's been 6 weeks and still working great. $350 well spent.”
Wei Z.
Refrigerator Repair
Cupertino, CA