Want a regional phone & address? Pick your area.
Maytag·Ovenmedium severity
Maytag Oven Error Code F5-E1
Self-clean door latch will not lock
Common Causes
- 1Door lock motor failure
- 2Lock switch failure
- 3Door warped from heat
Step-by-Step Troubleshooting
- 1
Check if the oven door latch is physically jammed — do not force it
- 2
Disconnect power and try to manually release the latch through the top vent or by removing the top panel
- 3
Inspect the latch motor assembly for broken gears or a seized motor
- 4
Test the latch motor — it should operate when 120V is applied
Pro Diagnostic Tip
On Maytag ranges, the latch motor has plastic gears that strip over time, especially after repeated self-clean cycles. If you hear the motor running but the latch does not move, the gears are stripped and the entire latch assembly must be replaced.
You Might Also Notice
- •Self-clean cycle does not start
- •Latch motor runs continuously but door does not lock
- •Grinding noise from latch area when self-clean is activated
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$100–$250
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10107820 Door Latch Assembly with MotorWPW10195934 Door Latch Switch Kit
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F5-E1 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does Maytag error code F5-E1 mean?
Maytag error code F5-E1 indicates: Self-clean door latch will not lock. This is a medium-severity issue affecting your oven.
How do I fix Maytag error code F5-E1?
Check if the oven door latch is physically jammed — do not force it Then, Disconnect power and try to manually release the latch through the top vent or by removing the top panel Then, Inspect the latch motor assembly for broken gears or a seized motor There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my oven has error F5-E1?
Besides the error code on the display, common signs include: Self-clean cycle does not start; Latch motor runs continuously but door does not lock; Grinding noise from latch area when self-clean is activated. If you notice any of these symptoms, check your oven's display panel for error code F5-E1.
How much does it cost to fix Maytag F5-E1?
Repair costs for Maytag F5-E1 typically range from $100 to $250 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.