Want a regional phone & address? Pick your area.
If the cooktop is still Beeping after moving/removing any object and cleaning the User Interface (Touchpad):
Clean the User Interface (Touchpad) to remove any food or other contaminants, remove/move any objects applying pressure to the User Interface (Touchpad) area.
Power unit down by turning off the circuit breaker(s) for one (1) minute.
Power unit up by turning on the circuit breaker(s).
Monitor the cooktop for one (1) minute to ensure the error code does not display again.
Verify cooktop operation.
Parts That May Need Replacement
Multimeter ($85), vacuum pump ($250), diagnostic software, and specialized hand tools. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Here's what a professional technician does to resolve this issue:
Diagnose the root cause, test affected components with calibrated meters, replace faulty parts with OEM replacements, and verify proper operation through a full test cycle.
This repair requires professional diagnostic tools, calibrated meters, and manufacturer-specific equipment. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Appliances involve high voltage (120-240V), pressurized water, gas lines, and chemical refrigerants. Over 400 DIY repair injuries are reported yearly. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Don't let error code Beeping or Audio Tones disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Maytag error code Beeping or Audio Tones indicates: If the cooktop is still Beeping after moving/removing any object and cleaning the User Interface (Touchpad):. This is a medium-severity issue affecting your cooktop.
Clean the User Interface (Touchpad) to remove any food or other contaminants, remove/move any objects applying pressure to the User Interface (Touchpad) area. Then, Power unit down by turning off the circuit breaker(s) for one (1) minute. Then, Power unit up by turning on the circuit breaker(s). There are 2 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
Repair costs for Maytag Beeping or Audio Tones typically range from $100 to $500 depending on the specific cause. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.