Want a regional phone & address? Pick your area.
KitchenAid·Ovenmedium severity
KitchenAid Oven Error Code F6E0
Return line not connected (gas)
Common Causes
- 1Gas valve wiring fault
- 2Igniter circuit open
- 3Safety valve failure
If you smell gas that does not ignite within 30 seconds, turn off the gas supply and ventilate the room.
Step-by-Step Troubleshooting
- 1
Verify the gas supply valve behind the range is fully open
- 2
Check the oven igniter — it should glow bright orange before gas releases. Dim or no glow means a weak igniter
- 3
Measure igniter current draw — below 3.0 amps means the igniter is too weak to open the gas valve
- 4
Inspect the gas safety valve wiring for loose connections or damage
Pro Diagnostic Tip
On KitchenAid gas ranges, the oven igniter must draw sufficient current (3.2-3.6 amps) to open the gas safety valve. A weak igniter glows orange but cannot pull enough amps. The igniter is a common wear part — expect replacement every 5-8 years on gas models.
You Might Also Notice
- •Oven igniter glows but gas never lights
- •Oven does not heat at all on bake or broil
- •Slight gas odor when oven attempts to ignite
- •Igniter glows dimly compared to when new
Parts, Cost & Difficulty
Repair Difficulty
Hard — Advanced Skills RequiredEstimated Repair Cost
$150–$325
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
WPW10195935 Oven Gas Safety ValveWPW10339564 Oven Igniter
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $15K+ in professional tools — your diagnostic is free.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code F6E0 disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
4.85 (232 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends May 31
Frequently Asked Questions
What does KitchenAid error code F6E0 mean?
KitchenAid error code F6E0 indicates: Return line not connected (gas). This is a medium-severity issue affecting your oven.
How do I fix KitchenAid error code F6E0?
Verify the gas supply valve behind the range is fully open Then, Check the oven igniter — it should glow bright orange before gas releases. Dim or no glow means a weak igniter Then, Measure igniter current draw — below 3.0 amps means the igniter is too weak to open the gas valve There are 1 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my oven has error F6E0?
Besides the error code on the display, common signs include: Oven igniter glows but gas never lights; Oven does not heat at all on bake or broil; Slight gas odor when oven attempts to ignite. If you notice any of these symptoms, check your oven's display panel for error code F6E0.
How much does it cost to fix KitchenAid F6E0?
Repair costs for KitchenAid F6E0 typically range from $150 to $325 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.