Want a regional phone & address? Pick your area.
KitchenAid·Cooktopmedium severity
KitchenAid Cooktop Error Code Indicator or Display Flashing
This is indicating that one or more keys are permanently pressed.
Common Causes
- 1If the correct type and size of pan is not placed on the chosen cooking area, “U” and the power level chosen will flash in the control display of the cooking area until a pan is detected or the cooking area is turned off.
Step-by-Step Troubleshooting
- 1
Make sure the cooktop controls are OFF.
- 2
Remove any objects left on the control area, and/or wipe any debris from the control panel surface.
- 3
Clean the cooktop touch control panel thoroughly.
- 4
Check that the saucepan is electromagnetic.
- 5
Check that the diameter of the saucepan is large enough.
- 6
Allow the saucepan to cool down in the event that it has become hot when used.
- 7
Move utensils and clean the cooktop surface.
- 8
Disconnect power by turning off circuit breaker(s).
Parts, Cost & Difficulty
Parts That May Need Replacement
control panel
Do You Have the Right Tools?
Multimeter ($85), vacuum pump ($250), diagnostic software, and specialized hand tools. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
What This Repair Involves
Here's what a professional technician does to resolve this issue:
Make sure the cooktop controls are OFF.
This repair requires professional diagnostic tools, calibrated meters, and manufacturer-specific equipment. Most homeowners find it safer and more cost-effective to have a licensed technician handle it.
Safety First — Know the Risks
Appliances involve high voltage (120-240V), pressurized water, gas lines, and chemical refrigerants. Over 400 DIY repair injuries are reported yearly. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Ready to Get This Fixed?
Don't let error code Indicator or Display Flashing disrupt your day. A professional diagnosis takes about 30 minutes — and it's free when you proceed with the repair.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does KitchenAid error code Indicator or Display Flashing mean?
KitchenAid error code Indicator or Display Flashing indicates: This is indicating that one or more keys are permanently pressed.. This is a medium-severity issue affecting your cooktop.
How do I fix KitchenAid error code Indicator or Display Flashing?
Make sure the cooktop controls are OFF. Then, Remove any objects left on the control area, and/or wipe any debris from the control panel surface. Then, Clean the cooktop touch control panel thoroughly. There are 5 more steps — see the full troubleshooting guide above. If these steps don't resolve the error, contact a professional.
How much does it cost to fix KitchenAid Indicator or Display Flashing?
Repair costs for KitchenAid Indicator or Display Flashing typically range from $100 to $500 depending on the specific cause. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related KitchenAid Cooktop Error Codes
Beeping or Audio TonesIf the cooktop is still Beeping after moving/removing any object and cleaning the User Interface (Touchpad):mediumC82Pan/pot size, material and positioning are very important to achieve maximum wattage.mediumDisplaying H or HOTAn H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.mediumE_03Remove any objects left on the control area, and/or wipe any debris from the control panel surface.mediumE_2Only use pots and pans made from ferromagnetic material that are suitable for use with an induction cooktop:mediumE_21The control panel switches off because of excessively high temperatures.medium
Call NowAvailable 24/7 — call or textBook Online