Want a regional phone & address? Pick your area.
Bertazzoni·Oven/Rangehigh severity
Bertazzoni Oven/Range Error Code E2
Oven temperature sensor open circuit
Common Causes
- 1Failed oven NTC temperature sensor
- 2Broken sensor wiring
- 3Disconnected sensor plug at the control board
- 4Corroded sensor connector
Step-by-Step Troubleshooting
- 1
Locate the NTC temperature sensor probe on the rear wall inside the oven cavity
- 2
Measure its resistance — an open circuit reads OL or infinite
- 3
Check the sensor plug at the control-board end for a loose or backed-out connection
- 4
Inspect the wiring run for breaks, especially where it passes the door hinge area
- 5
Replace the NTC sensor with a genuine European-spec part if it reads open
Pro Diagnostic Tip
E2 is an OPEN oven sensor circuit — the NTC reads OL or infinite, so the control has no temperature feedback and the oven will not heat. The connector is the most common failure point; reseat the sensor plug before condemning the sensor. European-spec NTCs have a specific resistance curve, so fit a genuine part.
You Might Also Notice
- •Oven not heating at all
- •Error immediately at bake start
- •Cavity temperature not shown on the display
- •Preheat never completing
Parts, Cost & Difficulty
Repair Difficulty
Moderate — Some Experience NeededEstimated Repair Cost
$150–$320
Parts + labor. Free diagnosis with repair.
Parts That May Need Replacement
Oven NTC temperature sensorSensor wiring harness
Do You Have the Right Tools?
Combustion analyzer ($300), igniter tester ($120), temperature calibrator ($150), and gas pressure manometer. Our technician arrives with $3,000+ in professional tools — your diagnostic is free.
Book a Free Diagnostic VisitOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Safety First — Know the Risks
Gas ovens involve live gas lines — a loose connection creates explosion and carbon monoxide risk. Electric ovens run on 240V circuits. Our techs are licensed and insured — let them handle the risk.
Let a Licensed Pro Handle ItOr call for a free consultation (415) 795-7300Available 24/7 — call or text
Licensed & Insured · 90-Day Warranty · Same-Day Service
Get Professional Help Now
Error code E2 is a high-severity issue that can cause further damage to your oven/range if left unresolved. A licensed technician can diagnose and fix it the same day.
Licensed & Insured · 90-Day Warranty · Same-Day Appointments Available
5.00 (36 verified reviews)
Same-Day Appliance Repair
Fixed or It's Free
Free Service Call & Diagnosis — no hidden fees, offer ends Sep 15
Book a Free Diagnostic VisitOr call (415) 795-7300Available 24/7 — call or text
Frequently Asked Questions
What does Bertazzoni error code E2 mean?
Bertazzoni error code E2 indicates: Oven temperature sensor open circuit. This is a high-severity issue affecting your oven/range.
How do I fix Bertazzoni error code E2?
Locate the NTC temperature sensor probe on the rear wall inside the oven cavity Then, Measure its resistance — an open circuit reads OL or infinite Then, Check the sensor plug at the control-board end for a loose or backed-out connection There are 2 more steps — see the full troubleshooting guide above. This repair typically requires professional tools and expertise.
How do I know if my oven/range has error E2?
Besides the error code on the display, common signs include: Oven not heating at all; Error immediately at bake start; Cavity temperature not shown on the display. If you notice any of these symptoms, check your oven/range's display panel for error code E2.
How much does it cost to fix Bertazzoni E2?
Repair costs for Bertazzoni E2 typically range from $150 to $320 depending on the specific cause and parts needed. EasyBear offers free diagnosis when you proceed with the repair. Call (415) 795-7300 for a same-day appointment.
Related Bertazzoni Oven/Range Error Codes
Call NowAvailable 24/7 — call or textBook Online