Washer Dryer Combo Heating Element Cost

How much does a washer dryer combo heating element replacement cost?#

Replacing the heating element in a washer dryer combo typically runs $160 to $320, and a routine job lands around $240. Whether the shop fits a factory part or an aftermarket one, and how much bench time it takes to reach the element, decide if you pay nearer $160 or $320. Two machines with the same fault can quote differently once you factor in how long it takes to expose the heating element on the unit. In practice the fix is quick once the fault is confirmed: the old heater comes out, the replacement goes in, and a full test cycle proves the unit is back to normal. Below, the cost breakdown shows what the component and the bench time each contribute to the total. Set against the $1,000 to $2,500 a new washer dryer combo costs to buy and install, restoring the heater is the economical move on any machine with good years left in it.

Washer Dryer Combo heating element replacement cost

• What it does: the heating element heats the water or air for the cycle.
• Signs it is failing: cold results, long cycles, or no heat at all.
• The repair job: testing continuity, replacing the element, and checking the connected sensors.
• DIY or pro: a confident DIYer can manage a plug-in element, but a hardwired one is safer for a pro.

Against a new washer dryer combo at $1,000–$2,500 installed, a heating element repair at $160–$320 is usually the cheaper fix — unless the washer dryer combo is already old or has other faults.

Pro note: the element rarely fails alone — a good tech also checks the thermostat and thermal cutoff so the new element does not burn out early.

Is replacing the heating element on a washer dryer combo worth it?#

On a reasonably young unit, $160 to $320 to restore the element beats the $1,000 to $2,500 of buying new without much debate; the fix buys years more use from a machine that is otherwise sound. Age shifts the math. When the heating element is the third thing to fail this year, or the unit is well past 8 years, a top-of-range $320 bill is better put toward a replacement than a patch. A useful test: if the heater is the only fault on an otherwise solid unit, fix it; if the machine is old and the repairs are piling up, price out a replacement first. Booking a pro means the heater is diagnosed right the first time and the repair carries a written guarantee, which matters most on a part buried this deep.

Washer Dryer Combo Heating element replacement cost: FAQ#

How much does a washer dryer combo heating element replacement cost?#

A washer dryer combo heater replacement generally runs $160–$320, and about $240 on a routine job. Part grade, brand, and how hard the element is to reach are what set where you land.

Is replacing the heater worth it, or should I just buy new?#

Usually worth it on a machine that is not too old — $160 to $320 is minor next to the $1,000 to $2,500 of buying new. Replacement only wins once the unit is aging and other repairs are stacking up behind this one.

What makes the heating element fail?#

Common causes are the constant heat-and-cool cycling that eventually cracks the element or burns out its coil. The warning signs to watch for are cold results, long cycles, or no heat at all.

Can I replace the heater myself?#

Most owners leave this one to a pro: reaching the heater and confirming the diagnosis takes the right tools, and a wrong part is money down the drain. A technician also carries the exact component and stands behind the work.

How long does the job take?#

Plan on about two to three hours for the swap itself, plus a test cycle afterward to confirm the fault is cleared. A tech who has done it before tends to work at the fast end of that estimate.